Ceramic fiber bulk is an excellent inorganic non-metallic material with various types and advantages of good insulation, heat resistance, corrosion resistance and high mechanical strength. Ceramic fiber bulk is made of glass balls or waste glass by melting, drawing, winding and weaving. The diameter of the monofilament is several microns to twenty microns, equivalent of 1/20-1/5 of a single human hair. Each bundle of fiber precursor is composed of hundreds or even thousands of monofilaments. Ceramic fiber bulk has good insulation performance. According to the physical principle, gas has low thermal conductivity, so excellent insulation materials usually have many air holes inside them. Ceramic fiber bulk has many air holes inside it and its fibers are in irregular arrangement, so it is an excellent insulation material with a low thermal conductivity of 0.03w/cm.k. Ceramic fiber bulk has advantages of noncombustible, no distortion and no embrittlement. It can resist high temperature up to 700 degrees and has A1 level of combustion performance. Ceramic fiber bulk has good corrosive resistance to strong acid and good recoverability. It has high tensile strength, more than 1.0kg, so it can resist any shock and vibration. It has low moisture absorption rate, close to zero. Ceramic fiber bulk does not contain any bonding agent and has no smell and no toxic. Compared with the traditional glass wool and rock wool, it does not contain any bonding agent and will not give off any toxic, acrid smoke at high temperature. Ceramic fiber bulk is usually used in the interior compartments and ceilings of advanced buildings and for the insulation of metal duct or the inner walls of bellows, noise absorption within the room and sweat control of metal ceilings.